Turbo with tipped PCD - 1-Cutting-edge Single-sided Inserts
The Turbo family takes square shoulder milling to the max. Suitable for most roughing, semi-finishing and finishing operations, these highly versatile cutters offer long tool life and high precision via optimized properties that reduce heat generation and cutting forces.
Turbo cutters have precision milled pocket seats that improve run-out, stability and tool life by providing optimal contact between the tool body and insert. Integrated through-coolant channels support high productivity and promote excellent chip evacuation.
The comprehensive range of inserts, carbide grades and corner radii available for use with Turbo cutters further increase their adaptability, accuracy and reliability. Inserts can be set to a true 90-degree cutting angle to create clean 90-degree walls and eliminate secondary operations. Inserts lock into place via a strong center screw placed in the same direction as cutting forces, and wiper flats optimize surface finishes. Such versatility also makes it possible for Turbo cutters to excel in slotting, ramping, facing, pocketing, plunging and turn milling operations.
R220.69
Cutter range = 12 – 125 mm, max depth of cut = 3.4 / 5.51 / 5.60 mm